1. APAS Installations
2. Sychronization
3. APAS-Wizard Installation
4. 2D Analysis with the APAS step by step
5. APASgait
6. APAS Upgrade Instructions
7. APAS and Peak
8. Analog System
9. Analysis of Results
10. Camera Resolution
11. CES
12. ComputerBoard Analog Board Installation Procedures
13. Capturing Video (Old Analog and New Digital)
14. Digitizing
15. Exporting data from the APAS to ASCII and Spreadsheet
16. FCE-Functional Capacity Evaluation
17. Why should I purchase the APAS System
18. Purchasing Options
19. General Information Questions abut the APAS System
20. General APAS Installations
21. Hi Speed Camera JVC-9800
22. Installing the JVC 9800
23. Video Formats, Video problems and Cameras
24. So, I downloaded the APAS system, what is next?
25. Site Key and Site Code
26. VCRs Information and Problems
27. Installing APAS Video Driver on Notebooks
28. Installing the Digital Video (DV) Card
29. Y2K
30. Purchasing new system
31. Trimming Module
32. Display Module
33. Transformation Module
34. Installing the A/D Analog Card
35. Installing the I-Omega Buz Capture Card
36. Modem communication with the APAS system
37. Panning
38. Users Comments
39. Recommendations by APAS users
40. Learning Biomechanics principles
41. Modem Connection
42. Buz Capture Card Installation and Problems
43. Hotels near our office in San Diego
44. Digitizing Module
45. APAS with Markers Sets System
46. File Formats for the APAS System
47. Modem Connection to ADI Inc.
48. Quaternions

49. Software GenLock

50. Do you want to be a Millionaire ?

----- Original Message -----

From: Brice Crawford

To: info@arieldynamics.com

Sent: Monday, March 26, 2001 8:32 AM

could you send me a brochure and a price list

thank you,

Laura Crawford

1205 N Ave A

Portales NM 88130

 

Hello Rizal,
Thank you for your message.  When you enter the SITE KEY provided by Ariel
Dynamics, that will activate the software license for unlimited use.  It is
perfectly normal for the Site Code information to change.  This has nothing
to do with your being able to operate the software.

When you open any of the APAS software modules (Display for example),
youwill see a brief message stating "Unlimited License".  If you press the
ENTER key when this message is displayed, you will access the license
information.  Once you have entered the SITE KEY, you do NOT need to press
the ENTER key anymore.

When you open the software module, the "Unlimited License" menu will display
briefly.  Just wait a few seconds and it will dissappear and the software
module will open.

Also note that the Analog module is an optional software module that was not
specified with the original order.  In order to perform a video analysis,
you should use the modules in the following order.

   Digital Video capture software (this is provided with the DV frame
grabber hardware)
   TRIM Module (used to "clip" the desired video for analysis)
   DIGITIZE Module (used to digitize the data and calibration points)
   TRANSFORM Module (used to convert that data to spatial coordinates)
   DISPLAY and/or APASVIEW Module (used to display analysis results)

I hope this information is helpful.  Please contact me for any additional
questions.

Sincerely,

John Probe
Ariel Dynamics, Inc.
Email:  info@arieldynamics.com





----- Original Message -----
From: "Pusat Sukan" <Sukan@um.edu.my>
To: <info@arieldynamics.com>
Sent: Friday, April 27, 2001 10:12 PM
Subject: Re: Attn John Probe (Site Key)


hello,

sorry to bother you again. i keyed in the key into the analog module and
everything when well, so i closed the module and went on to another module,
but when i displayed the site code it displayed a whole new code! it was the
same with all the other modules, now even the analog module got a new code
and is unlicensed. and when i displayed the system check it also gave out a
new parameter...everytime i opened it a new one. the current parameter and
code is

Parameter: 8CE7D495CDB55590
cODE : D617 FC5D 7FCA 88D0 7B

Thanks for your help

Rizal

<<< "Ariel" <info@arieldynamics.com>  4/27  8:20a >>>
Hello Rizal,

Thank you for your message.  It was no trouble to provide the APAS CD.  I
hope the installation occurred smoothly!  Based on the information you have
provided, a SITE KEY has been generated for the APAS computer system.

   System Parameter:   B8A311-F8A9D-11FFE
   Site Code:     D64F-847D-7FCA-D036-FB
   SITE KEY:   FF07 49A9 67C2 2BDD F360 DD32 CC

NOTE:  Please do not reformat the hard drive, upgrade the operating system
or change the directory structure of the APAS system files as this will
invalidate the software license.

Please keep us informed with your progress using the APAS.  We look forward
to working with you and would be happy to answer any questions.

Sincerely,

John Probe
Ariel Dynamics, Inc.
Email:  info@arieldynamics.com



----- Original Message -----
From: "Pusat Sukan" <Sukan@um.edu.my>
To: <gideon@arielnet.com>
Sent: Thursday, April 26, 2001 12:29 AM
Subject: Attn: Mr John Probe (Site Key)


Hello,

i am writting in from Pusat Sukan, University of Malaya, Malaysia. we have
received the Apas CD from the technican and the codes for the key are:

Parameter: B8A311F8A9D11FFE
Code: D64F847D7FCAD036FB

Thank you for accomadating our request for you to provide us with a CD.
Unfortunately it is the required procedure in a goverment funded Uni such as
us. Sorry for all the trouble

Kind Regards,
Rizal